Télécharger RadBeacon sur PC

       


Bonne nouvelle! Une application Windows comme RadBeacon est disponible! Télécharger ci-dessous:

Sinon, suivez les instructions ci-dessous pour utiliser RadBeacon sur PC:

RadBeacon Sur iTunes

In order to re-enter configurable mode for a cette application X2, remove the front cover and switch the beacon power switch to OFF and back to ON.  In order to re-enter configurable mode for a cette application Tag, remove the front cover and press the configuration push button switch near the coin cell battery.  In order to re-enter configurable mode for a cette application USB, remove and restore power to the device.  The cette application™ app is the configuration utility for cette application proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services.  Calibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging.  Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon.  With the cette application app you can scan for nearby configurable Radius Networks beacons.  Submit a valid PIN to update the settings for this beacon.  The cette application app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities.  Submit a valid PIN to reset the settings for your beacon to factory defaults.  A beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again.  Select any cette application in the table to view it's detailed settings.  Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service.  Update the measured power value with the results of your calibration activity and update your settings.  Reboot the beacon into Direct Firmware Update mode.  In order to re-enter normal operational model, simply remove and replace power to the device.  Once discovered, you can display each beacon's operating settings and make modifications to those settings.  Contact Radius Networks support for information on the procedure for firmware update or replacement.  Submit a new and existing PIN to update the PIN for your beacon.  Press the Action Menu button and select Update PIN.  Reset the device to the original factory settings.  The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured.  Press the Action Menu button and select Calibrate.  Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table.